当代西方城市安全观念变迁

城市安全问题伴随着城市的产生而出现,近年来随着城市化进程在全球范围迅猛推进,城市安全问题显得尤为重要与紧迫。资本、人口向城市大量集聚,城市物质空间结构和城市社会结构巨变,城市整体建成环境及其依托的自然生态环境恶化趋势明显,城市安全脆弱度增大,当代城市安全面临新的挑战。西方发达国家对当代城市安全问题的新动向极为关注,对城市安全观念作了深入全面的拓展研究。从城市安全动态发展的视角,对相关文献进行梳理与总结,考察当代西方城市安全观念研究变迁态势,以期为我国城市安全问题的研究深化提供有益的借鉴和启示,推动我国城市化进程的健康和可持续发展。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

Forced displacement and behavioral change: an empirical study of returnee households in the Nuba Mountains

We use a unique data-set gathered during a short-lived interwar period in the Nuba Mountains of Sudan to compare characteristics of the households returning after the conflict with those that stayed in their communities of origin. We found that returning households seemed to face worse economic conditions, particularly in the case of female-headed returnee households. Nevertheless, our results show that returnees tend to perform better on different health indicators. Using a detailed set of variables about hygiene and sanitary habits, we explore the hypothesis that the latter result may be related to changes in attitudes given the distinct experiences during displacement. We show that returnees are indeed more likely to adopt these measures.     

如何运用交际教学法活跃语法教学

英语语法教学要根据教材内容补充真实的语言材料,保证输入材料的趣味性。在课堂教学中,围绕一个语言现象设计出各种真实的交际情景,从而避免单调乏味的语法讲解;设计丰富多彩的课堂活动,加强社会交际型练习,活跃课堂气氛,提高学生运用语法知识进行交际的能力;对于学生在课堂活动中出现的错误,应掌握适当的时机,及时纠错,在课堂上建立一种无拘无束的轻松愉快的学习环境。     

基于生物视觉原理的图像结构信息变化检测方法

为克服多时相遥感图像变化检测中照度差异和配准误差的影响,采用边缘结构信息进行变化检测。利用多方向Gabor函数从图像梯度强度图中提取边缘结构信息,称之为边缘标记(Edge Tag,ET),通过比较多时相遥感图像中ET的互相关系数实现变化检测。为减小差异较小的边缘对检测结果的影响,在相关系数的计算中引入抑制因子。仿真图像和真实图像的实验结果表明,该方法能克服图像照度差异和配准误差对变化检测的影响,取得了较好的检测效果。     

相变储能材料十六醇-癸酸二元体系相变温度的测定

采用步冷曲线法测定了不同组成的十六醇-癸酸二元体系的相变温度,绘制了该体系的T-X相图,该体系为具有最低共熔点的二元体系,其最低共熔温度为常温,具有广泛的应用价值。     

基于级库存的维修器材整合供应策略研究

针对传统器材供应模式效率低的问题,借助供应链管理的思想提出了多需求点整合供应模式,并建立了基于级库存策略的整合优化模型,对成本各组成部分分析求解,得到了最优总成本对应的策略参数,其中总成本考虑了供应中心补货成本、库存持有成本、供应成本和供应延迟成本．最后通过算例与直接供应策略进行了比较,证明了整合供应策略的有效性．     

高硬再制造表面强化层的加热切削研究

应用高性能硬质合金、陶瓷刀具和CBN刀具对常温条件下难以加工的高硬堆焊材料进行加热切削试验。试验结果表明：尽管加热条件下冲击效应降低,但CBN刀具仍然破损严重;陶瓷刀具虽然也无法实现理想的切削,但切削过程中刀具破损模式从崩碎式失效转变为磨损失效;3种刀具中高性能硬质合金应用效果最佳,其最佳参数条件下,一个切削里程后刀面VB值仅为0．3mm,试验过程中,刀具磨损随表面加热温度、切削速度、切削深度的提高而增大,但随进给量取值的增大而减小,其中切削速度对刀具VB值的影响最大,而进给量和削切深度对刀具VB值的影响较小。综合分析还表明：试验中刀具磨损速率仍然受刀具红硬性极限的限制。     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.